ImagePro>AW: ImagePro>Re: Marker:Font format

[Horst.Woermann[at]t-online.de (Horst Wörmann)]

Hello Mark,
I've loaded this patch, but still there are error messages.
First, please check line 46 of the macro - I think it should read
ysize = docInf.Height * yratio (not docInf.Width).

With uncalibrated images this macro works perfectly, but not
with calibrated. The error message is "Type mismatch in line 31".
(Image Data: 1600x1920 pixels, TIFF, Calibration x = y = 0.27194
units/pixel.
Unit: µm)
I've also tested the updated version 1.2 (modified by Kevin Ryan),
image size and Marker Size are calculated wrongly, and
there is a type mismatch in line 56 (xratio = Val(szout).

Best regards,
Horst

> -----Ursprüngliche Nachricht-----
> Von: Image-Pro Plus Users Email List
> [mailto:imagepro-users@lists.mediacy.com]Im Auftrag von Mark A. Nicklas
> Gesendet am: Donnerstag, 31. Januar 2002 19:09
> An: Image-Pro Plus Users Email List
> Betreff: ImagePro>Re: AW: ImagePro>Re: Marker:Font format
>
> Hello Horst,
>
>    The first thing I would recommend you do is to download and install the
> latest patch for IPP 4.5.
> It will update your IPP 4.5 to 4.5.0.27 this can be found at
> http://support.mediacy.com/answers/showquestion.asp?faq=35&fldAuto
> =234#ipp .
> I ran the macro on my computer with a 1600x1920 24 bit RGB and a
> 16 bit gray
> scale image and I had no problems.
> My guess would be that the patch should fix your problem.
>
> Regards,
>
> Mark A. Nicklas
> Technical Services Engineer/Quality Assurance Analyst
> Media Cybernetics, Inc. "From Images to Answers"
>
>
>
> -----Original Message-----
> From:	Image-Pro Plus Users Email List
> [mailto:imagepro-users@lists.mediacy.com] On Behalf Of Horst Wvrmann
> Sent:	Thursday, January 31, 2002 12:36 PM
> To:	Image-Pro Plus Users Email List
> Subject:	ImagePro>AW: ImagePro>Re: Marker:Font format
>
> Hello,
> using this macro I get an error message: "overflow in line 40".
> What is wrong? I have IPP 4.5.0.22, the picture is 1600x1920 pixels,
> TIFF, file size about 9,2 MB.
> I am not familiar with macro writing, so can you help me please?
> Horst


***********************************************************
Need an Image-Pro macro or driver? Find it at http://www.Solutions-Zone.com
Got an Image-Pro macro or driver? Add it to http://www.Solutions-Zone.com
***********************************************************

This message is sent to you because you are subscribed to <imagepro-users@lists.mediacy.com>.
To unsubscribe, email to: <imagepro-users-off@lists.mediacy.com>
To switch to the DIGEST mode, email to <imagepro-users-digest@lists.mediacy.com>
To switch to the INDEX mode, email to <imagepro-users-index@lists.mediacy.com>
Send administrative queries to  <imagepro-users-request@lists.mediacy.com>
To subscribe or unsubscribe visit http://www.solutions-zone.com/ipednld/subscriber.asp